DITL_1215.txt
Items: (2 entries)
  0:
    Bounds: x1=149, y1=265, x2=229, y2=297
    Type: 4
    Info: 'OK'
  1:
    Bounds: x1=24, y1=4, x2=355, y2=258
    Type: 64
    Info: '"d'

DITL_1115.txt
Items: (2 entries)
  0:
    Bounds: x1=265, y1=106, x2=344, y2=133
    Type: 4
    Info: 'OK'
  1:
    Bounds: x1=103, y1=15, x2=332, y2=98
    Type: -120
    Info: 'An error occurred in writing to disk.  Please determine whether any free space remains on this volume.'

DITL_1015.txt
Items: (2 entries)
  0:
    Bounds: x1=265, y1=106, x2=344, y2=133
    Type: 4
    Info: 'OK'
  1:
    Bounds: x1=103, y1=15, x2=332, y2=98
    Type: -120
    Info: 'The file "^0" is not a CompuRoc thrust curve file.'

DITL_933.txt
Items: (19 entries)
  0:
    Bounds: x1=10, y1=257, x2=110, y2=289
    Type: 4
    Info: '>>Compute>>'
  1:
    Bounds: x1=171, y1=255, x2=248, y2=271
    Type: -120
    Info: 'Altitude  = '
  2:
    Bounds: x1=381, y1=250, x2=481, y2=270
    Type: 4
    Info: 'Info'
  3:
    Bounds: x1=381, y1=276, x2=481, y2=296
    Type: 4
    Info: 'Done'
  4:
    Bounds: x1=245, y1=209, x2=317, y2=225
    Type: 16
    Info: '300.0'
  5:
    Bounds: x1=77, y1=20, x2=149, y2=36
    Type: 16
    Info: '0.0'
  6:
    Bounds: x1=77, y1=47, x2=149, y2=63
    Type: 16
    Info: '0.0'
  7:
    Bounds: x1=400, y1=20, x2=472, y2=36
    Type: 16
    Info: '0.0'
  8:
    Bounds: x1=400, y1=47, x2=473, y2=63
    Type: 16
    Info: '0.0'
  9:
    Bounds: x1=18, y1=20, x2=72, y2=36
    Type: -120
    Info: 'El. #1 ='
  10:
    Bounds: x1=14, y1=47, x2=72, y2=63
    Type: -120
    Info: 'Az. #1 ='
  11:
    Bounds: x1=339, y1=20, x2=393, y2=36
    Type: -120
    Info: 'El. #2 ='
  12:
    Bounds: x1=335, y1=47, x2=393, y2=63
    Type: -120
    Info: 'Az. #2 ='
  13:
    Bounds: x1=45, y1=1, x2=439, y2=230
    Type: -64
    Info: '"c'
  14:
    Bounds: x1=135, y1=276, x2=248, y2=292
    Type: -120
    Info: 'Track Closure  = '
  15:
    Bounds: x1=251, y1=255, x2=351, y2=271
    Type: 8
    Info: '0.00'
  16:
    Bounds: x1=251, y1=276, x2=351, y2=292
    Type: 8
    Info: '0.00 %'
  17:
    Bounds: x1=40, y1=230, x2=231, y2=250
    Type: 6
    Info: 'Geodesic Method'
  18:
    Bounds: x1=230, y1=230, x2=440, y2=248
    Type: 6
    Info: 'Vertical Midpoint Method'

DITL_915.txt
Items: (2 entries)
  0:
    Bounds: x1=265, y1=106, x2=344, y2=133
    Type: 4
    Info: 'OK'
  1:
    Bounds: x1=103, y1=15, x2=332, y2=98
    Type: -120
    Info: 'The text file "^0" is not of the correct format.  Please consult manual.'

DITL_833.txt
Items: (20 entries)
  0:
    Bounds: x1=40, y1=240, x2=115, y2=266
    Type: 4
    Info: 'OK'
  1:
    Bounds: x1=181, y1=240, x2=256, y2=266
    Type: 4
    Info: 'Cancel'
  2:
    Bounds: x1=105, y1=4, x2=196, y2=24
    Type: -120
    Info: 'Display Scale'
  3:
    Bounds: x1=10, y1=45, x2=115, y2=61
    Type: -120
    Info: '____________'
  4:
    Bounds: x1=195, y1=45, x2=300, y2=61
    Type: -120
    Info: '____________'
  5:
    Bounds: x1=8, y1=20, x2=296, y2=50
    Type: -120
    Info: 'Distance Axes                        Velocity Axes
One Tick Equals                      One Tick Equals                      '
  6:
    Bounds: x1=13, y1=65, x2=181, y2=83
    Type: 6
    Info: '2 meters (~6.5 feet)'
  7:
    Bounds: x1=13, y1=90, x2=181, y2=106
    Type: 6
    Info: '4 meters (~13 feet)'
  8:
    Bounds: x1=13, y1=115, x2=180, y2=131
    Type: 6
    Info: '20 meters (~65 feet)'
  9:
    Bounds: x1=13, y1=140, x2=186, y2=157
    Type: 6
    Info: '40 meters (~130 feet)'
  10:
    Bounds: x1=13, y1=165, x2=189, y2=182
    Type: 6
    Info: '100 meters (~325 feet)'
  11:
    Bounds: x1=13, y1=190, x2=190, y2=205
    Type: 6
    Info: '200 meters (~650 feet)'
  12:
    Bounds: x1=13, y1=215, x2=193, y2=233
    Type: 6
    Info: '500 meters (~1635 feet)'
  13:
    Bounds: x1=195, y1=65, x2=319, y2=85
    Type: 6
    Info: '2 m/s (~6.5 f/s)'
  14:
    Bounds: x1=195, y1=90, x2=317, y2=107
    Type: 6
    Info: '4 m/s (~13 f/s)'
  15:
    Bounds: x1=195, y1=115, x2=324, y2=131
    Type: 6
    Info: '10 m/s (~33 f/s)'
  16:
    Bounds: x1=195, y1=140, x2=325, y2=156
    Type: 6
    Info: '20 m/s (~65 f/s)'
  17:
    Bounds: x1=195, y1=165, x2=334, y2=183
    Type: 6
    Info: '30 m/s (~100 f/s)'
  18:
    Bounds: x1=195, y1=190, x2=333, y2=207
    Type: 6
    Info: '40 m/s (~130 f/s)'
  19:
    Bounds: x1=195, y1=215, x2=334, y2=232
    Type: 6
    Info: '60 m/s (~200 f/s)'

DITL_815.txt
Items: (2 entries)
  0:
    Bounds: x1=265, y1=106, x2=344, y2=133
    Type: 4
    Info: 'OK'
  1:
    Bounds: x1=103, y1=15, x2=332, y2=98
    Type: -120
    Info: 'Unable to write the file "^0" on this volume.'

DITL_733.txt
Items: (15 entries)
  0:
    Bounds: x1=85, y1=20, x2=151, y2=36
    Type: 16
    Info: '0.00'
  1:
    Bounds: x1=158, y1=20, x2=198, y2=36
    Type: -120
    Info: 'gram'
  2:
    Bounds: x1=0, y1=4, x2=73, y2=36
    Type: -120
    Info: 'propellant mass:'
  3:
    Bounds: x1=0, y1=70, x2=72, y2=103
    Type: -120
    Info: 'total impulse  ='
  4:
    Bounds: x1=0, y1=108, x2=70, y2=141
    Type: -120
    Info: 'average thrust    ='
  5:
    Bounds: x1=0, y1=148, x2=71, y2=165
    Type: -120
    Info: 'duration ='
  6:
    Bounds: x1=158, y1=86, x2=198, y2=102
    Type: -120
    Info: 'N-sec'
  7:
    Bounds: x1=158, y1=123, x2=198, y2=139
    Type: -120
    Info: 'N'
  8:
    Bounds: x1=158, y1=147, x2=198, y2=163
    Type: -120
    Info: 'sec'
  9:
    Bounds: x1=84, y1=86, x2=145, y2=102
    Type: 8
    Info: '0.00'
  10:
    Bounds: x1=84, y1=123, x2=145, y2=139
    Type: 8
    Info: '0.00'
  11:
    Bounds: x1=84, y1=147, x2=145, y2=163
    Type: 8
    Info: '0.00'
  12:
    Bounds: x1=0, y1=50, x2=75, y2=66
    Type: -120
    Info: 'total mass:'
  13:
    Bounds: x1=160, y1=50, x2=198, y2=66
    Type: -120
    Info: 'gram'
  14:
    Bounds: x1=80, y1=50, x2=155, y2=66
    Type: 16
    Info: '0.00'

DITL_715.txt
Items: (2 entries)
  0:
    Bounds: x1=265, y1=106, x2=344, y2=133
    Type: 4
    Info: 'OK'
  1:
    Bounds: x1=103, y1=15, x2=332, y2=98
    Type: -120
    Info: 'Unable to remove the non-CompuRoc file "^0".'

DITL_633.txt
Items: (1 entries)
  0:
    Bounds: x1=0, y1=0, x2=416, y2=240
    Type: 64
    Info: '"a'

DITL_615.txt
Items: (3 entries)
  0:
    Bounds: x1=23, y1=66, x2=102, y2=93
    Type: 4
    Info: 'Cancel'
  1:
    Bounds: x1=265, y1=66, x2=344, y2=93
    Type: 4
    Info: 'OK'
  2:
    Bounds: x1=103, y1=15, x2=332, y2=58
    Type: -120
    Info: 'Revert to last saved version of "^0"?'

DITL_533.txt
Items: (1 entries)
  0:
    Bounds: x1=0, y1=6, x2=408, y2=232
    Type: 64
    Info: '"b'

DITL_515.txt
Items: (2 entries)
  0:
    Bounds: x1=265, y1=106, x2=344, y2=133
    Type: 4
    Info: 'OK'
  1:
    Bounds: x1=103, y1=15, x2=332, y2=98
    Type: -120
    Info: 'The simulated velocity has reached the transonic range.  The accuracy of the ensuing simulation may be limited.'

DITL_433.txt
Items: (17 entries)
  0:
    Bounds: x1=24, y1=218, x2=99, y2=244
    Type: 4
    Info: 'OK'
  1:
    Bounds: x1=195, y1=221, x2=270, y2=247
    Type: 4
    Info: 'Cancel'
  2:
    Bounds: x1=92, y1=7, x2=209, y2=25
    Type: -120
    Info: 'Delay Event Data'
  3:
    Bounds: x1=7, y1=69, x2=107, y2=86
    Type: -120
    Info: 'mass burnoff:'
  4:
    Bounds: x1=128, y1=41, x2=201, y2=57
    Type: 16
    Info: '1.00'
  5:
    Bounds: x1=224, y1=69, x2=267, y2=85
    Type: -120
    Info: 'gram'
  6:
    Bounds: x1=7, y1=41, x2=107, y2=58
    Type: -120
    Info: 'duration:'
  7:
    Bounds: x1=125, y1=69, x2=203, y2=85
    Type: 16
    Info: '0.0'
  8:
    Bounds: x1=224, y1=41, x2=267, y2=57
    Type: -120
    Info: 'sec.'
  9:
    Bounds: x1=193, y1=145, x2=243, y2=161
    Type: 16
    Info: '0.0'
  10:
    Bounds: x1=177, y1=182, x2=250, y2=198
    Type: 16
    Info: '0.750'
  11:
    Bounds: x1=252, y1=143, x2=318, y2=164
    Type: 8
    Info: 'cm.'
  12:
    Bounds: x1=0, y1=140, x2=69, y2=166
    Type: 5
    Info: 'new'
  13:
    Bounds: x1=0, y1=175, x2=162, y2=206
    Type: 5
    Info: 'new drag coefficient:'
  14:
    Bounds: x1=82, y1=145, x2=186, y2=162
    Type: 0
    Info: ''
  15:
    Bounds: x1=55, y1=110, x2=264, y2=132
    Type: -120
    Info: 'At start of delay change to:'
  16:
    Bounds: x1=0, y1=100, x2=328, y2=101
    Type: -64
    Info: '—'

DITL_415.txt
Items: (2 entries)
  0:
    Bounds: x1=265, y1=106, x2=344, y2=133
    Type: 4
    Info: 'OK'
  1:
    Bounds: x1=103, y1=15, x2=332, y2=98
    Type: -120
    Info: 'The thrust curve file "^0" could not be found in the folder with "^1".'

DITL_333.txt
Items: (7 entries)
  0:
    Bounds: x1=30, y1=115, x2=105, y2=141
    Type: 4
    Info: 'OK'
  1:
    Bounds: x1=198, y1=115, x2=273, y2=141
    Type: 4
    Info: 'Cancel'
  2:
    Bounds: x1=95, y1=10, x2=206, y2=27
    Type: -120
    Info: 'Burn Event Data'
  3:
    Bounds: x1=32, y1=54, x2=120, y2=71
    Type: -120
    Info: 'Engine type:'
  4:
    Bounds: x1=121, y1=54, x2=293, y2=71
    Type: 8
    Info: 'engine name'
  5:
    Bounds: x1=33, y1=76, x2=133, y2=93
    Type: -120
    Info: 'Cluster factor:'
  6:
    Bounds: x1=143, y1=76, x2=216, y2=92
    Type: 16
    Info: '1.00'

DITL_315.txt
Items: (2 entries)
  0:
    Bounds: x1=265, y1=106, x2=344, y2=133
    Type: 4
    Info: 'OK'
  1:
    Bounds: x1=103, y1=15, x2=332, y2=98
    Type: -120
    Info: 'Impossible ^0 value of ^1 encountered.  Please check input data for accuracy.'

DITL_233.txt
Items: (42 entries)
  0:
    Bounds: x1=394, y1=223, x2=472, y2=246
    Type: 4
    Info: 'OK'
  1:
    Bounds: x1=394, y1=259, x2=472, y2=282
    Type: 4
    Info: 'Cancel'
  2:
    Bounds: x1=20, y1=10, x2=171, y2=35
    Type: -120
    Info: 'mass without motors'
  3:
    Bounds: x1=20, y1=38, x2=124, y2=55
    Type: 0
    Info: ''
  4:
    Bounds: x1=290, y1=38, x2=399, y2=55
    Type: -120
    Info: 'drag coefficient'
  5:
    Bounds: x1=20, y1=63, x2=120, y2=79
    Type: -120
    Info: 'launch angle'
  6:
    Bounds: x1=290, y1=63, x2=399, y2=79
    Type: -120
    Info: 'launcher length'
  7:
    Bounds: x1=387, y1=217, x2=478, y2=253
    Type: 0
    Info: ''
  8:
    Bounds: x1=240, y1=12, x2=286, y2=32
    Type: -120
    Info: 'gram'
  9:
    Bounds: x1=343, y1=14, x2=447, y2=30
    Type: 0
    Info: ''
  10:
    Bounds: x1=178, y1=14, x2=228, y2=30
    Type: 16
    Info: '0.0'
  11:
    Bounds: x1=178, y1=38, x2=228, y2=54
    Type: 16
    Info: '0.0'
  12:
    Bounds: x1=401, y1=38, x2=444, y2=54
    Type: 16
    Info: '0.750'
  13:
    Bounds: x1=178, y1=63, x2=228, y2=79
    Type: 16
    Info: '0.0'
  14:
    Bounds: x1=401, y1=63, x2=444, y2=79
    Type: 16
    Info: '1.0'
  15:
    Bounds: x1=240, y1=61, x2=268, y2=81
    Type: -120
    Info: 'deg.'
  16:
    Bounds: x1=240, y1=36, x2=291, y2=56
    Type: 8
    Info: 'cm.'
  17:
    Bounds: x1=140, y1=114, x2=180, y2=130
    Type: 16
    Info: '10.0'
  18:
    Bounds: x1=188, y1=113, x2=215, y2=133
    Type: -120
    Info: 'sec.'
  19:
    Bounds: x1=450, y1=61, x2=472, y2=81
    Type: -120
    Info: 'm.'
  20:
    Bounds: x1=15, y1=221, x2=139, y2=238
    Type: -120
    Info: 'gravitational acc.'
  21:
    Bounds: x1=15, y1=162, x2=101, y2=178
    Type: -120
    Info: 'temperature'
  22:
    Bounds: x1=15, y1=253, x2=107, y2=269
    Type: -120
    Info: 'wind velocity'
  23:
    Bounds: x1=15, y1=191, x2=85, y2=207
    Type: -120
    Info: 'elevation'
  24:
    Bounds: x1=208, y1=191, x2=332, y2=208
    Type: -120
    Info: 'sea level pressure'
  25:
    Bounds: x1=348, y1=114, x2=480, y2=132
    Type: 0
    Info: ''
  26:
    Bounds: x1=102, y1=161, x2=216, y2=179
    Type: 0
    Info: ''
  27:
    Bounds: x1=224, y1=162, x2=264, y2=178
    Type: 16
    Info: '20.0'
  28:
    Bounds: x1=105, y1=191, x2=158, y2=207
    Type: 16
    Info: '0.0'
  29:
    Bounds: x1=269, y1=160, x2=296, y2=180
    Type: -120
    Info: '¡C'
  30:
    Bounds: x1=165, y1=189, x2=192, y2=209
    Type: -120
    Info: 'm.'
  31:
    Bounds: x1=334, y1=191, x2=387, y2=207
    Type: 16
    Info: '1013.2'
  32:
    Bounds: x1=203, y1=221, x2=256, y2=238
    Type: -120
    Info: 'm/s**2'
  33:
    Bounds: x1=146, y1=221, x2=199, y2=237
    Type: 16
    Info: '9.807'
  34:
    Bounds: x1=170, y1=253, x2=223, y2=270
    Type: -120
    Info: 'm/sec.'
  35:
    Bounds: x1=111, y1=253, x2=164, y2=269
    Type: 16
    Info: '0.0'
  36:
    Bounds: x1=393, y1=191, x2=429, y2=208
    Type: -120
    Info: 'mbar'
  37:
    Bounds: x1=134, y1=106, x2=222, y2=140
    Type: 0
    Info: ''
  38:
    Bounds: x1=14, y1=114, x2=134, y2=130
    Type: 0
    Info: ''
  39:
    Bounds: x1=260, y1=115, x2=348, y2=131
    Type: -120
    Info: 'Atmosphere:'
  40:
    Bounds: x1=290, y1=14, x2=343, y2=30
    Type: -120
    Info: 'profile:'
  41:
    Bounds: x1=15, y1=145, x2=479, y2=146
    Type: -64
    Info: '€'

DITL_215.txt
Items: (4 entries)
  0:
    Bounds: x1=20, y1=40, x2=99, y2=67
    Type: 4
    Info: 'Burn'
  1:
    Bounds: x1=264, y1=40, x2=343, y2=67
    Type: 4
    Info: 'Cancel'
  2:
    Bounds: x1=142, y1=40, x2=221, y2=67
    Type: 4
    Info: 'Delay'
  3:
    Bounds: x1=20, y1=10, x2=332, y2=32
    Type: -120
    Info: 'What type of event would you like to add?'

DITL_134.txt
Items: (2 entries)
  0:
    Bounds: x1=292, y1=76, x2=360, y2=96
    Type: 4
    Info: 'OK'
  1:
    Bounds: x1=64, y1=8, x2=360, y2=52
    Type: -120
    Info: 'IÕm sorry, the serial number you entered is incorrect.'

DITL_133.txt
Items: (31 entries)
  0:
    Bounds: x1=14, y1=10, x2=142, y2=26
    Type: 16
    Info: 'Launch'
  1:
    Bounds: x1=14, y1=31, x2=142, y2=47
    Type: 16
    Info: 'xxxx'
  2:
    Bounds: x1=14, y1=52, x2=142, y2=68
    Type: 16
    Info: 'xxxx'
  3:
    Bounds: x1=14, y1=73, x2=142, y2=89
    Type: 16
    Info: 'xxxx'
  4:
    Bounds: x1=14, y1=94, x2=142, y2=110
    Type: 16
    Info: 'xxxx'
  5:
    Bounds: x1=14, y1=115, x2=142, y2=131
    Type: 16
    Info: 'xxxx'
  6:
    Bounds: x1=14, y1=136, x2=142, y2=152
    Type: 16
    Info: 'xxxx'
  7:
    Bounds: x1=14, y1=157, x2=142, y2=173
    Type: 16
    Info: 'xxxx'
  8:
    Bounds: x1=14, y1=178, x2=142, y2=194
    Type: 16
    Info: 'xxxx'
  9:
    Bounds: x1=14, y1=199, x2=142, y2=215
    Type: 16
    Info: 'xxxx'
  10:
    Bounds: x1=14, y1=220, x2=142, y2=236
    Type: 16
    Info: 'xxxx'
  11:
    Bounds: x1=14, y1=241, x2=142, y2=257
    Type: 16
    Info: 'xxxx'
  12:
    Bounds: x1=14, y1=262, x2=142, y2=278
    Type: 16
    Info: 'xxxx'
  13:
    Bounds: x1=311, y1=130, x2=412, y2=158
    Type: 4
    Info: 'Start'
  14:
    Bounds: x1=311, y1=180, x2=412, y2=208
    Type: 4
    Info: 'Pause'
  15:
    Bounds: x1=311, y1=230, x2=412, y2=258
    Type: 4
    Info: 'Stop'
  16:
    Bounds: x1=304, y1=10, x2=417, y2=26
    Type: 8
    Info: '0.0  sec'
  17:
    Bounds: x1=168, y1=10, x2=281, y2=26
    Type: -120
    Info: 'Simulation time:'
  18:
    Bounds: x1=150, y1=64, x2=229, y2=80
    Type: -120
    Info: 'Distance:'
  19:
    Bounds: x1=150, y1=99, x2=225, y2=115
    Type: -120
    Info: 'Velocity:'
  20:
    Bounds: x1=242, y1=42, x2=392, y2=58
    Type: -120
    Info: 'X                      Y'
  21:
    Bounds: x1=235, y1=64, x2=314, y2=80
    Type: 8
    Info: '0.0'
  22:
    Bounds: x1=331, y1=64, x2=410, y2=80
    Type: 8
    Info: '0.0  m'
  23:
    Bounds: x1=235, y1=99, x2=314, y2=115
    Type: 8
    Info: '0.0'
  24:
    Bounds: x1=331, y1=99, x2=430, y2=115
    Type: 8
    Info: '0.0  m/sec'
  25:
    Bounds: x1=150, y1=180, x2=245, y2=196
    Type: -120
    Info: 'Acceleration:'
  26:
    Bounds: x1=150, y1=211, x2=245, y2=227
    Type: -120
    Info: 'Mach no.:'
  27:
    Bounds: x1=250, y1=180, x2=306, y2=196
    Type: 8
    Info: '0.00  g'
  28:
    Bounds: x1=250, y1=211, x2=294, y2=227
    Type: 8
    Info: '0.00'
  29:
    Bounds: x1=150, y1=150, x2=250, y2=167
    Type: -120
    Info: 'Current Mass:'
  30:
    Bounds: x1=250, y1=150, x2=307, y2=166
    Type: -120
    Info: '0.00 g'

DITL_132.txt
Items: (2 entries)
  0:
    Bounds: x1=292, y1=76, x2=360, y2=96
    Type: 4
    Info: 'OK'
  1:
    Bounds: x1=64, y1=16, x2=352, y2=40
    Type: -120
    Info: 'Thank you for registering!'

DITL_131.txt
Items: (6 entries)
  0:
    Bounds: x1=332, y1=76, x2=400, y2=96
    Type: 4
    Info: 'OK'
  1:
    Bounds: x1=252, y1=76, x2=316, y2=96
    Type: 4
    Info: 'Cancel'
  2:
    Bounds: x1=116, y1=12, x2=400, y2=28
    Type: 16
    Info: ''
  3:
    Bounds: x1=116, y1=40, x2=400, y2=56
    Type: 16
    Info: ''
  4:
    Bounds: x1=12, y1=40, x2=110, y2=56
    Type: -120
    Info: 'Serial Number:'
  5:
    Bounds: x1=12, y1=12, x2=55, y2=28
    Type: -120
    Info: 'Name:
'

DITL_130.txt
Items: (7 entries)
  0:
    Bounds: x1=108, y1=244, x2=188, y2=264
    Type: 4
    Info: 'Register'
  1:
    Bounds: x1=236, y1=244, x2=316, y2=264
    Type: 4
    Info: 'Not Yet'
  2:
    Bounds: x1=8, y1=8, x2=402, y2=208
    Type: 64
    Info: '"b'
  3:
    Bounds: x1=24, y1=212, x2=119, y2=228
    Type: -120
    Info: 'Registered to:'
  4:
    Bounds: x1=124, y1=212, x2=408, y2=228
    Type: -120
    Info: 'Username'
  5:
    Bounds: x1=0, y1=204, x2=405, y2=205
    Type: 64
    Info: '"a'
  6:
    Bounds: x1=0, y1=233, x2=405, y2=234
    Type: 64
    Info: '"a'

DITL_129.txt
Items: (33 entries)
  0:
    Bounds: x1=258, y1=184, x2=316, y2=204
    Type: 4
    Info: 'OK'
  1:
    Bounds: x1=10, y1=10, x2=154, y2=29
    Type: -120
    Info: 'Maximum altitude:'
  2:
    Bounds: x1=10, y1=31, x2=201, y2=48
    Type: -120
    Info: 'Maximum velocity:'
  3:
    Bounds: x1=10, y1=86, x2=176, y2=103
    Type: -120
    Info: 'Maximum acceleration:'
  4:
    Bounds: x1=200, y1=10, x2=297, y2=26
    Type: -120
    Info: '0.0 m'
  5:
    Bounds: x1=200, y1=31, x2=295, y2=47
    Type: -120
    Info: '0.0 m/s'
  6:
    Bounds: x1=200, y1=86, x2=305, y2=103
    Type: -120
    Info: '0.0 g'
  7:
    Bounds: x1=317, y1=10, x2=350, y2=25
    Type: -120
    Info: 'at'
  8:
    Bounds: x1=317, y1=31, x2=350, y2=46
    Type: -120
    Info: 'at'
  9:
    Bounds: x1=317, y1=86, x2=350, y2=101
    Type: -120
    Info: 'at'
  10:
    Bounds: x1=350, y1=10, x2=425, y2=26
    Type: -120
    Info: '0.0 s'
  11:
    Bounds: x1=350, y1=31, x2=425, y2=47
    Type: -120
    Info: '0.0 s'
  12:
    Bounds: x1=350, y1=86, x2=425, y2=102
    Type: -120
    Info: '0.0 s'
  13:
    Bounds: x1=10, y1=105, x2=176, y2=122
    Type: -120
    Info: 'Liftoff mass'
  14:
    Bounds: x1=200, y1=105, x2=317, y2=124
    Type: -120
    Info: '0.0 grams'
  15:
    Bounds: x1=10, y1=124, x2=176, y2=141
    Type: -120
    Info: 'Minimum mass'
  16:
    Bounds: x1=200, y1=124, x2=304, y2=143
    Type: -120
    Info: '0.0 grams'
  17:
    Bounds: x1=317, y1=124, x2=350, y2=139
    Type: -120
    Info: 'at'
  18:
    Bounds: x1=350, y1=124, x2=425, y2=140
    Type: -120
    Info: '0.0 s'
  19:
    Bounds: x1=10, y1=143, x2=176, y2=160
    Type: -120
    Info: 'Time of last burn'
  20:
    Bounds: x1=200, y1=143, x2=275, y2=159
    Type: -120
    Info: '0.0 s'
  21:
    Bounds: x1=138, y1=184, x2=196, y2=204
    Type: 4
    Info: 'Print'
  22:
    Bounds: x1=10, y1=161, x2=176, y2=178
    Type: -120
    Info: 'Ideal delay'
  23:
    Bounds: x1=200, y1=161, x2=275, y2=177
    Type: -120
    Info: '0.0 s'
  24:
    Bounds: x1=4, y1=180, x2=429, y2=181
    Type: -64
    Info: '—'
  25:
    Bounds: x1=10, y1=67, x2=201, y2=84
    Type: -120
    Info: 'Velocity at end of rod:'
  26:
    Bounds: x1=200, y1=67, x2=295, y2=83
    Type: -120
    Info: '0.0 m/s'
  27:
    Bounds: x1=317, y1=67, x2=350, y2=82
    Type: -120
    Info: 'at'
  28:
    Bounds: x1=350, y1=67, x2=425, y2=83
    Type: -120
    Info: '0.0 s'
  29:
    Bounds: x1=10, y1=49, x2=201, y2=66
    Type: -120
    Info: 'Maximum mach:'
  30:
    Bounds: x1=200, y1=49, x2=295, y2=65
    Type: -120
    Info: '0.0'
  31:
    Bounds: x1=317, y1=49, x2=350, y2=64
    Type: -120
    Info: 'at'
  32:
    Bounds: x1=350, y1=49, x2=425, y2=65
    Type: -120
    Info: '0.0 s'

DITL_128.txt
Items: (0 entries)

DITL_115.txt
Items: (4 entries)
  0:
    Bounds: x1=25, y1=58, x2=99, y2=76
    Type: 4
    Info: 'Yes'
  1:
    Bounds: x1=141, y1=86, x2=215, y2=104
    Type: 4
    Info: 'Cancel'
  2:
    Bounds: x1=25, y1=86, x2=99, y2=104
    Type: 4
    Info: 'No'
  3:
    Bounds: x1=20, y1=12, x2=223, y2=45
    Type: -120
    Info: 'Save the file "^0" before ^1?'